# GENERATED CODE - DO NOT EDIT
# This file was generated by src/arm/gentramp.sh

#  Copyright (c) 2010, Plausible Labs Cooperative, Inc.
#  
#  Permission is hereby granted, free of charge, to any person obtaining
#  a copy of this software and associated documentation files (the
#  Software''), to deal in the Software without restriction, including
#  without limitation the rights to use, copy, modify, merge, publish,
#  distribute, sublicense, and/or sell copies of the Software, and to
#  permit persons to whom the Software is furnished to do so, subject to
#  the following conditions:
#
#  The above copyright notice and this permission notice shall be included
#  in all copies or substantial portions of the Software.
#
#  THE SOFTWARE IS PROVIDED AS IS'', WITHOUT WARRANTY OF ANY KIND,
#  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
#  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
#  NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
#  HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
#  WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
#  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
#  DEALINGS IN THE SOFTWARE.
#  -----------------------------------------------------------------------

.text
.align 12
.globl _ffi_closure_trampoline_table_page
_ffi_closure_trampoline_table_page:

    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]


    // trampoline
    // Save to stack
    stmfd sp!, {r0-r3}

    // Load the context argument from the config page.
    // This places the first usable config value at _ffi_closure_trampoline_table-4080
    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
    ldr r0, [pc, #-4092]

    // Load the jump address from the config page.
    ldr pc, [pc, #-4092]

